A matching joint-size label does not establish third-party system compatibility. Before ordering bases, check the specified joint size against the levelling-system manufacturer's specifications.
TILVARQ Tile Levelling Bases are offered in 1.0 mm and 1.5 mm variants. Each 20 L pail contains 2,000 bases. The product is bases only; wedges and pliers are not included.
1. Start with the specified joint
Confirm whether the project specifies a 1.0 mm or 1.5 mm joint. Select the corresponding base variant only after checking the specification. Read 1.0 mm vs 1.5 mm Tile Levelling Bases for the distinction between the two available options.
2. Use the levelling-system manufacturer's specifications
Follow the current specifications issued by the manufacturer of the levelling system being used. Specific base dimensions have not been verified or published for this draft, so this Guide does not imply that those measurements are available on the TILVARQ product page. Do not infer dimensions or compatibility from a photograph.
3. Confirm wedges and pliers separately
Wedges and pliers are not included with TILVARQ Tile Levelling Bases. Check the required wedges and pliers against the levelling-system manufacturer's specifications.
4. Review the installation requirements
Check the tile, substrate, joint and installation requirements in the project specification and relevant system instructions. Tile levelling components do not replace substrate preparation, adhesive coverage, movement joints or correct installation technique.
5. Do not assume third-party brand compatibility
TILVARQ does not confirm compatibility with any third-party system. A similar appearance or matching joint-size label is not sufficient evidence. Use the levelling-system manufacturer's current specifications before ordering.
Compatibility check before checkout
- Confirm the specified joint size.
- Review the levelling-system manufacturer's current specifications.
- Check the required wedges and pliers against those specifications.
- Review the project specification.
- Confirm the quantity from the actual layout.
- Do not proceed on the assumption of universal compatibility.
CTA
View the available Tile Levelling Base variants, then check the specified joint size against the levelling-system manufacturer's specifications. TILVARQ does not confirm third-party system compatibility.